SOP For Cooling System (Chillers)

SOP For cooling system i.e. (chillers) is described in this post which you can follow in the section of the General Industry SOP.

OBJECTIVE

To lay down the procedure for Chillers.

SCOPE

This SOP shall be applicable for Chillers 100 TR

RESPONSIBILITY

Operator

Engineer

Production Officer

ACCOUNTABILITY

Head of Engineering

PROCEDURE 

FOR STARTING CHILLERS

Ensure inlet and outlet valves of condenser cooling water pump; primary and secondary chilled water pumps are open.

Ensure inlet and outlet valves of condenser and evaporator pipeline at chiller are open.

Ensure water is available in balancing tank and cooling tower.

Press green push button of condenser cooling water pump, primary & secondary chilled water pump and the cooling tower fan.

Ensure evaporator and condenser water pressure is 1 to 3 kg/ Cm².

The secondary water pressure is 1.5 to 3 .5 kg/ Cm².

Press “AUTO” green button to start the chiller.

Maintain log sheet of chiller.

FOR STOPPING CHILLERS

Press “STOP” red button of Chiller.

Press red push button of condenser cooling water pump, primary & secondary chilled water pump and cooling tower fan