Dettol Preparation for Cleaning in Pharmaceuticals

Standard operating procedure for the preparation of the Dettol 2.5% solution for cleaning purposes is describe in this post.

{getToc} $title={Table of Contents}

1.0  OBJECTIVE:

To lay down a procedure for the preparation of the Dettol 2.5% solution for cleaning purposes and before entering in working areas.

2.0  SCOPE:

This SOP shall be applicable to all the working areas of the department.

3.0  RESPONSIBILITY:

3.1  Primary: Sanitary supervisor.

3.2  Secondary: Helper/sweeper.

4.0  ACCOUNTABILITY:

4.1  Head of the Department.

5.0  MATERIAL AND EQUIPMENT:

5.1  Conc. Dettol

5.2  Purified water.

5.3  Bucket/bowel.

5.4  Stirrer (for mixing).

6.0  PROCEDURE:

6.1  PRECAUTIONS:

6.1.1        Take all necessary safety measures during preparation of solution.

6.1.2        Wear goggles.

6.1.3        Wear appropriate protective gloves.

6.1.4        Wear respiratory full face mask with appropriate filter where applicable.

6.1.5        In case of emergency inform supervisor and contact medical help.

6.1.6        Prepare solution on daily basis according to the requirement.

6.2  METHOD:

6.2.1        Take a S.S. bowl to produce 2.5% Dettol solution.

6.2.2        Add purified water 500ml in the S.S. bowl.

6.2.3        And then add 25ml of conc. Dettol in it.

6.2.4        Mix it thoroughly with the stirrer.

6.2.5        And finally make up the volume 1000ml (approx. 475ml add).

6.2.6        Mix it again thoroughly.

6.2.7        It can be used as disinfecting surfaces, cleaning of equipments and before entering in working areas as hand wash.

{getButton} $text={Download in Microsoft Office} $icon={Download} $color={Hex Color}